Instructions For Totally Built-In Appliances - Electrolux EUN1272 Instruction Manual

Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
Depth of housing
Width of housing
PR 32
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
50 mm
D526
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
D022
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper strip
butts up against the unit (1) and make sure that
the lower hinge is in line with the surface of the
unit (2).
mm 880
mm 550
mm 560
880
Width 540 mm
min.
200 cm
2
1
2
D132
2. Apply joint the sealing strip as shown in figure.
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws (I) provided in the kit included with the
appliance.
C
D
4. Snap vent grille (B) and hinge cover (E) into
position.
Apply covers (C-D) on joint cover lugs and into
hinge holes.
21
I
E
B