Technical Specifications
Model
Dimensions
Height (cm)
Width (cm)
Depth (cm)
Lighting
Grease filter
Power absorption
Electrical connection:
Subject to change without notice.
Installation
Unpacking
Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the company responsible for the
transportation.
Damages, faults and eventually missing details
should immediately be reported to the retailer.
Take care of the packing materials so that small
children cannot play with them.
Fitting
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60
cm. above electric burners or 75 cm. above gas or
mixed-fuel burners (Fig. 9).
The hood can be installed above these heights but
for optimum performance it should be installed at
the distance quoted for the appropriate heat source.
Electrical connection for UK only
Safety warnings for the electrician
Connect the hood to the mains supply via a double
pole switch which has 3 mm minimum separation
between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom
only:
- the wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black, -
- the wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
EFG 540
EFG 535
13,9
13,9
52,4
52,4
28,9
28,9
2 x 40 W
2 x 40 W
2
1
320 W
200 W
220-240 V
220-240 V
Fig. 9
Mounting accessories included
1 Coupling ring
8 metal screws 2,9 x 16
10
Min
Min
75 cm
60 cm