Download  Print this page

Unpacking; Damages; Use; Positioning - Electrolux ESF 2435 Instruction Book

Hide thumbs




If the dishwasher has been damaged during transport,
you should immediately notify the company responsible
for delivering it.
Check that the dishwasher is undamaged. If you discover
any damage, faults or that anything is missing, you should
notify the dealer immediately.
Never leave packaging material in a place where
children may play with it.
Check that the following accessories are supplied with the
dishwasher when you unpack it:
– A funnel for filling salt (1)
– Elbow for discharge hose (2)


This dishwasher is designed solely for washing household
utensils suitable for washing in a dishwasher. Using it for
other purposes may damage it and invalidate the guarantee.


The dishwasher is intended to be installed on a kitchen
sink, worktop or built-in. To function properly, make sure
that the appliance is level. Its height can be adjusted with
the adjustable feets (5 mm each). See the illustration for
built-in measurements.
Protecting the dishwasher against
If the dishwasher is placed in an environment where
the temperature sometimes fall below 0° C, there is
a risk that the small amount of water which remains
inside the parts of the dishwasher will freeze and
damage it. To prevent this you should:
1. Turn off the water supply to the dishwasher.
2. Remove the water inlet and discharge hoses.
3. Make sure that there is coarse-grained salt in the
salt container for the water softener.
The appliance is only to be used and stored indoors
at normal room temperature. The manufacture is
not responsible for any frost damage.
- 14 -

Hide quick links: