Controls and programme table
All figures are nominal and vary for example due to temperature variations on the inlet water.
The figures apply to washing up 5 settings.
For loads which have heavily dried-on food
remnants and for those which are heavily soiled.
For normal soiled loads.
For lightly soiled loads, such as cups, saucers
Note! If more than one Temperature button is
pressed in, the machine selects the lowest
To start the machine:
- Turn the selector knob clockwise to the programme
start. The ON/OFF switch is built into the programme
selector. During the water heating process, the timer
is standing still. To isolate the dishwasher from the
mains completely, unplug it from the wall socket.
Cycle sequence lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme
Press the handle down and open the door. Avoid opening
the door while the machine is running. If the door is opened
and is put standing ajar after a completed programme, the
dishes will dry faster.
- 5 -