Electrolux EKC6562AOX User Manual page 26

26 www.electrolux.com
Minimum distances
Dimen-
sion
A
B
The appliance does not
operate.
The appliance does not
operate.
The appliance does not
operate.
The oven does not heat
up.
The oven lamp does not
operate.
Steam and condensation
settle on the food and in
the oven cavity.
The appliance is off but it
still makes the sounds.
The core temperature
sensor does not work.
The clock display shows
"F11".
B
A
mm
2
685
Problem
13.3 Levelling
Use small feet on the bottom of appliance
to set same level of cooker top surface
with other surfaces
A
Possible cause
The power plug is not
correctly put in.
The earth fault switch is
switched off.
The appliance is off.
The necessary settings
are not set.
The oven lamp is defec-
tive.
You left the dish in the
oven for too long.
The cooling fan still oper-
ates.
You did not install the
core temperature sensor
point correctly in the
meat.
The core temperature
sensor has short circuit or
the plug of the core tem-
perature sensor is not
tightly in position in the
socket.
Remedy
Put in the power plug
correctly.
Switch on the earth fault
switch.
Switch on the appliance.
Control the settings.
Replace the oven lamp.
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends.
No action needed. This is
normal.
Insert the core tempera-
ture sensor point in the
middle of the meat, as far
as it goes.
Insert the plug of the core
temperature sensor as far
as it will go into the sock-
et on the side wall of the
oven.