Advertisement
4. Before putting in operation
Ensure that the device is disconnected from the mains power supply respectively that the main
switch is switched off.
Remove protective cardboard from UV-C lamp (14)
Insert the stainless steel filter 586 x 324 mm (15) into the hood body (1)
Close grease collecting pan (12)
Switch on main switch (17) on top of the device
(LED mains indicator is lit up green)
The appliance is now ready for operation!
UV-C lamp (14) with
protective cardboard
Hood body (11) with
Stainless steel/ carbon filter (15)
5. Operation 7-rocker control
Page 6
Main switch
UV-C lamp (14) without
protective cardboard
Heat detector
(11)
Advertisement
