The Control Panel; Audible Signals - Electrolux ESL 6143 Use & Care Manual

The Control Panel

On/Off button
Function buttons:
in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- the setting of the water softener,
- the cancelling of a washing programme in progress,
- deactivation/activation of the audible signals.
Programme selection buttons:
the desired washing programme (see "Washing programmes"
chart).
Delay button:
this option allows the start of the programme
to be delayed by 3, 6 or 9 hours.
Indicator lights:
have the following meanings:
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse Aid refilling indicator light, illuminates when
rinse aid has run out.
End: illuminates when the washing programme has
ended, it also has added functions of visual
signalling as:
- the setting of the water softener,
- deactivation/activation of the audible signals,
- intervention of an alarm due to the malfunction of
the machine.
Function buttons
Programme selection buttons
allows the selection of
5
Delay button

Audible signals

Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off before starting this
process)
Factory setting: audible signals activated
1. Press the On/Off button. All programme selection buttons
indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously
the function buttons 2 and 3 for about 2 seconds, the
indicator light of the set programme button starts flashing
for about 2 seconds.
After about 2 seconds the indicator lights of all the
programme selection buttons will illuminate indicating
that the set programme has been cancelled and that the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the
indicator lights of the function buttons 1, 2 and 3 start
flashing.
3. Press function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, at the same time the End indicator light
illuminates indicating that the audible signals are active.
4. To deactivate the audible signals, press again function
button 3, the End indicator light turns off, indicating that the
audible signals have been deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
To activate again the audible signals simply follow the above
operations until the End indicator light illuminates.
Indicator lights