Related Manuals for Electrolux EW 1065 F
Summary of Contents for Electrolux EW 1065 F
- Page 1 L A V A D O R A W A S H I N G M A C H I N E M ANU AL DE US O INSTRU CTION B OOKLET E W 10 65 F E W 12 65 F E W 14 65 F 124 972 020...
- Page 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
-
Page 3: Table Of Contents
Contents Warnings 28-29 Maintenance Bodywork Disposal Detergent dispenser drawer Drain filter Tips for environmental protection 29 Water inlet filter Emergency emptying out Technical specifications Frost precautions Installation Something not working? 48-49 Unpacking Positioning Water inlet Water drainage Electrical connection Your new washing machine Description of the appliance Door locked pilot light Detergent dispenser drawer... -
Page 4: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door •... -
Page 5: Disposal
Child safety • Keep all detergents in a safe place out of children’s reach. • Children are often not aware of how dangerous • Make sure that children or pets do not climb into electrical appliances can be. When the machine is the drum. -
Page 6: Technical Specifications
Technical specifications DIMENSIONS Height 85 cm Width 60 cm Depth 60 cm MAXIMUM LOAD Cotton 5 kg Synthetics 2 kg Delicates 2 kg Woollens 1 kg SPIN SPEED 1000 rpm max. (EW 1065F) 1200 rpm max. (EW 1265F) 1400 rpm max. (EW 1465F) POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED... -
Page 7: Installation
Installation Unpacking Positioning Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units. -
Page 8: Water Drainage
Water drainage Electrical connection The end of the drain hose can be positioned in three This machine is designed to operate on a 220-230 V, ways: single-phase, 50 Hz supply. Hooked over the edge of a sink using the plastic Check that your domestic electrical installation can hose guide supplied with the machine. -
Page 9: Your New Washing Machine
Your new washing machine This new washing machine, which is fitted with the Direct Spray system, patented Electrolux, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water and electricity consumption is proportional to the quantity and type of laundry being washed. -
Page 10: Use
Control panel 1000 EW 1065 F 12 3 5 6 7 8 9 10 11 13 14 1 Programme chart Position E corresponds to the ENERGY SAVING programme and position to “cold wash”. A programme chart in Spanish is in the interior part At the end of the programme the selector dial of the detergent dispenser drawer. -
Page 11: Extra Rinse Button
EW 1465 F To empty out water there are 3 possibilities: • Cotton, linen: • Select programme “D” (draining): 500/700/1000 max 1400 r.p.m. The water is emptied out without spinning. • Synthetics, wool: Attention! Before selecting programme “D” the selector dial has to be positioned on O (cancelling). 500/700 max 1000 r.p.m. - Page 12 12 DISPLAY Delayed start The display shows the following information: The selected delay (24 hours max) set by means of Cancelling - Duration of the programme - the relevant button appears on the display for 4 Delayed start - Incorrect option selection - Alarm seconds, then the duration of the previously selected code.
-
Page 13: Functions
13 START/PAUSE button Prewash Main wash Rinses Stop with water in the tub Drain Spin Alarm The ALARM pilot light flashes in the event of operating problems. This button has three functions: At the same time one of the following lights starts to Start - Pause - Draining of water. -
Page 14: Programme Information
Cancelling a programme B = Rinses (Aclarados) Turn the selector dial to O to cancel a programme which is running: three flashing dashes appear on With this programme it is possible to rinse and spin the display. Now you can select a new programme. garments which have been washed by hand. -
Page 15: Washing Hints
Laundry weights Washing hints The following weights are indicative: Sorting the laundry bathrobe 1200 g napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens. -
Page 16: Detergents And Additives
Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly. -
Page 17: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 18: Operating Sequence
4. Switch the machine on Operating sequence To switch the machine on, press the ON/OFF button : the mains-on light comes on. Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. -
Page 19: Select The Required Options
7. Select the required options 9. Start the programme The light corresponding to the depressed button To start the selected programme, press the illuminates. START/PAUSE button; the corresponding light stops flashing. The pilot light corresponding to the wash phase which is running is on. The door light comes on to indicate that the door is locked. -
Page 20: Washing Programmes
Programme chart Washing programmes Consumption* Type of Programme Additional Max. Section Temp. fabric description functions load Energy Water Time min. light blue 95° White Wash at 95°C 5 kg cotton 3 rinses Normal spin light blue White cotton Wash at 60°C 5 kg economy 3 rinses... -
Page 21: Special Programmes
Programme chart Special programmes Consumption* Selector Programme Additional Max. Section dial Programme description functions load Energy Water Time position min. blue Soak Soak at 40°C 5 kg (Remojo) stop with water in tub. To drain, depress START/PAUSE button The machine automatically empties itself after 18 hours. -
Page 22: Maintenance
Maintenance 1. Bodywork 3. Drain filter Clean the outside of the machine with warm water The drain filter collects threads and small objects and a neutral, non-abrasive household detergent. inadvertently left in the laundry. Check regularly that Rinse with clean water and dry with a soft cloth. the filter is clean. -
Page 23: Emergency Emptying Out
5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •... -
Page 24: Something Not Working
Something not working? Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display and at the same time the light , the light of the START/PAUSE button and one of the following lights start to flash: - E10 + : problem with the water supply... -
Page 25: Laundry Is Not Spun Enough
Problem Possible cause • Spinning starts late or the • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in laundry is not spun enough: the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.