Honeywell HD3CHS User Manual page 18

SENS-UP
BLC
GAIN
AREA SETUP
LEFT/RIGHT
WIDTH
TOP/BOTTOM
HEIGHT
RETURN
D-WDR
18
Set the Sense-Up function. Move the joystick control
Left/Right to select:
AUTO mode to then select a value from x2 to x256, or
OFF (default)
Backlight compensation. Control the light level to
overcome severe backlighting conditions. Select
MIDDLE from:
4
OFF (default)
4
3
BLC to set the area of the screen
4

GAIN: HIGH, MIDDLE (default), LOW
RET
AREA SETUP: DEFAULT, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGHT
HSBLC to set the high sensitivity image level from
1 to 8 (5 is the default).
AREA SETUP: DEFAULT, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGHT
Digital wide dynamic range. Select from:
OFF (default), INDOOR, OUTDOOR