Electrical Connection; Ducted Version Air Exhaust System; Recirculation Version Air Outlet - Electrolux EFP60032 User Manual

Connections
DUCTED VERSION AIR EXHAUST
SYSTEM
When installing the ducted version, con-
nect the hood to the chimney using ei-
ther a fl exible or rigid pipe ø120 mm, the
choice of which is left to the installer.
nsert the adapting ring 10 on the
• I
hood body air outlet
• Fix the pipe in position using suffi cient
pipe clamps (not supplied).
• Remove any activated charcoal fi l-
ters.
RECIRCULATION VERSION AIR
OUTLET
• Cut a hole ø 125 mm in any shelf that may
be positioned over the hood.
• Connect the fl ange to the outlet on the
shelf over the hood using a fl exible or rigid
pipe ø120 mm.
• Fix the pipe in position using suffi cient
pipe clamps (not supplied).
• Fix the directional grille 8 on the recircula-
tion air outlet using the 2 screws 12e (2,9
x 9,5) provided.
• Ensure that the activated charcoal fi lters
have been inserted.

ELECTRICAL CONNECTION

• Connect the hood to the mains through a
two-pole switch having a contact gap of at
least 3 mm.
• When opening the sliding carriage for the
fi rst time after installing the hood, pull it out
briskly until it clicks.
electrolux 7
Installation
EN