No terminal display
If the configuration terminal displays nothing when the switch is powered on, verify the following items:
The power supply is supplying power to the switch.
•
The console cable is properly connected.
•
The console cable has no problem and the terminal settings are correct.
•
Garbled terminal display
If terminal display is garbled, verify that the following settings are configured for the terminal, for
example, HyperTerminal:
Baud rate—9,600
•
Data bits—8
•
Parity—none
•
Stop bits—1
•
•
Flow control—none
Emulation—VT100
•
39