Verifying The Installation - HP 5920 Series Installation Manual

5920&5900 switch series
Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
2.
Connect the other end of the power cord to the DC power source.
3.
Figure 36 Connecting the 650W DC power supply

Verifying the installation

After you complete the installation, verify that:
There is enough space for heat dissipation around the switch, and the rack is stable.
The grounding cable is securely connected.
The correct power source is used.
The power cords are properly connected.
All the interface cables are cabled indoors. If any cable is routed outdoors, verify that the socket
strip with lightning protection and lightning arresters for network ports have been properly
connected.
25
Figure
35.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents