Table of Contents
Advertisement
1.Fill the ice cube maker until the cubes
will be full in the horizontal position or by
the load line mark in the vertical
position. After this close the ice cube
maker with cap.
2.Place the holder in the lid of the freez-
er and leave to solidify
3.To loosen the frozen cubes, either
bend the ice cube tray or hold it under
running water for a few seconds.
Important! Never try to free an ice tray
that is frozen to the freezer
compartment using pointed or sharp
edged objects. Use a soft plastic
scraper.
Replacement of electric bulbs
Warning! Risk of electric shock! Prior to
replacement of electric bulbs, remove
the plug from the mains socket or discon-
nect or unscrew the fuse or lodgement.
←
Lamp
For the removal of the lampshade you have to
push the hook by a screwdriver first, and than you can
turn it out
Lamp specification: 220 to 240 V, max
15W bulb holder: E14
electrolux cold 13
1.Turn the temperature control knob
counterclockwise to"off" position.
2.Remove mains plug
3.For replacement of the bulb press the
cover hook and remove as shown in
the illustration
4.Replace defective light bulb.
5.Place the cover again.
Packaging and positioning
Food must be cold before freezing
(no more than room temperature)
Food must be packed in airtight and
moisture -proof packaging to prevent it
from drying out.
Place fresh food for freezing close to
the cold sides of the freezer, making
sure that it is not in contact with frozen
food already in the freezer.
Never fill the freezer to more than
loading line (arrow with
Load Line
Fyldningsniveau
dashed line) shown on
Fyllingsniva
Niveau de de remplissage
Füllhöhe
the illustration.
See under "Helpful
hints".
Capacity
The freezing capacity of the freezer is
stated in the data plate (kg/24 hours). Do
not exceed the amount stated - if you do,
the freezing capacity time will be extended.
The data plate is located on the back of the
cabinet.
Hide quick links:
Advertisement
Table of Contents
