Memory Module - HP Pavilion 14 Maintenance And Service Manual

Memory module

WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
Description
4 GB (DDR3-1600 MHz, PC3-12800)
2 GB (DDR3-1600 MHz, PC3-12800)
IMPORTANT:
and replacement.
Before removing a memory module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
8. Remove the USB board (see
9. Remove the WLAN (see
10. Remove the system board (see
To remove a memory module:
1. Turn the system board upside down to access the memory module.
2. Spread the retention clips (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/Audio jack on page
WLAN module on page
20).
24).
28).
32).
35).
System board on page
Spare part number
641369-005
652972-005
34).
38).
Component replacement procedures 41