In 1" Function - Electrolux ESF 4160 Instruction Book

Indicator lights:
have the following meanings:
Programme in progress: illuminates when a
washing programme has been set and remains
illuminated for all the duration of the washing
programme.
Turns off when the washing programme has ended.
When delay start has been set, this indicator light
turns off and will come on again once the
countdown has elapsed and the washing
programme has started.
End of programme: illuminates when the washing
programme has ended.
"3 in 1 function": indicates the
activation/deactivation of the 3 in 1 function
(see "3 in 1 function").
salt refilling indicator light, illuminates when the salt
has run out
rinse aid refilling indicator light, illuminates when
the rinse aid has run out
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.

"3 in 1" function

This appliance is equipped with the function 3 in 1, that allows
the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this option (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of "3 in 1" combi detergent tablets, the duration of
the washing programme may change. In this case, in the
digital display, the indication of the running time of the
programme is automatically updated.
NOTE: Once the programme is running, the 3 in 1 function
can NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "To cancel a
washing programme in progress") and then deactivate the 3 in
1 function.
In this case you have to set a washing programme (and
eventual options) again.
Activation/deactivation of the "3 in 1 function"
(The dishwasher must be switched off)
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
If a programme indicator light is on, this means that a wash
programme has been selected. The programme must be
cancelled: press simultaneously the function buttons 2 and
3 for about 2 seconds. All the indicator lights will turn off
(except for the On/Off indicator light and eventually salt
and rinse aid indicator lights) indicating that the set
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2, 3 and 4 start
flashing.
3. Press the function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of the
function button 4 goes on flashing.
4. Press the function button 4 again, the 3 in 1 indicator light
illuminates, indicating that the 3 in 1 function is active.
To deactivate the function press the function button 4 again,
the indicator light turns off.
3 in1 function active
3 in 1 function not active
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
NOTE: if the drying results are not satisfactory it is possible to
activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only
be possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, also the
rinse aid indicator light on the control panel is
automatically activated.
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
If a programme indicator light is on, this means that a wash
programme has been selected. The programme must be
cancelled: press simultaneously the function buttons 2 and
3 for about 2 seconds. All the indicator lights will turn off
(except for the On/Off) indicating that the set programme
has been cancelled and the machine is now in setting
mode.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2, 3 and 4 start
flashing.
3. Press the function button 2, the indicator lights of function
buttons 1, 3 and 4 turn off while the indicator light of the
function button 2 goes on flashing, the digital display
indicates the current setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
4. To change the setting, press the function button 2 again, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
7
indicator light on
indicator light off