Operation - Electrolux EKC 60353 Instruction Booklet

Operation

Push-Pull control knobs
Some models are provided with push-
pull control knobs (see picture). These
knobs can be completely sunken inside
the control panel when the oven is not
working.
Ceramic hob cooking zones
To switch on a cooking zone, turn the
relevant control knob clockwise to the re-
quired heat setting.
The control knob is numbered 0 - 9.
0 - OFF
9 - Maximum.
The hob has two types of cooking zones:
3 normal cooking zones (back left,
back right and front right)
We recommend the plates are
switched to maximum (9) for a short
while to boost the cooking zone, and
then adjusted to the required setting.
1 double circuit cooking zone (front
left)
The front left cooking zone has two
heating elements.
- To switch on the smaller circular
cooking zone, turn the relevant con-
trol knob clockwise to the required
heat setting.
- To switch on both heating elements,
turn the control knob clockwise to
maximum heat setting (9) then turn the
knob further to nearly reach the "0"
symbol. You will hear a "click" and the
wider cooking zone will switch on.
Then turn back the knob to position 9
and adjust it to the required heat
setting.
Please be aware that the two heating
elements will now operate together, giv-
ing a higher power output than a normal
cooking zone.
electrolux 9
Control knob for normal cooking
zone
Control knob for double circuit
cooking zone