Table of Contents
Advertisement
The alarm
sound does not
stop.
All products
continue to turn
Is DI1 CH short-circuited?
off.
The product
The product is automatically reset
was reset at
every morning at 02:05 am.
midnight.
The device is
Is the device you want to control
not controlled.
not locked?
The device icon
Is the device with errors
has an error
connected correctly?
mark.
Guide to Open Source Software
The following GPL/LGPL execution file and libraries used for this product follows GPL/LGPL license
contract.
If you request source code to LG Electronics through the following e-mail, we will send them in
CDROM with the payment necessary for medium and transportation.
This suggestion is valid for 3 years after you received this product from LG Electronics.
You can receive the original GPL/LGPL license from http://opensource.lge.com.
Part of the software used for this product follows the following copyright.
Copyright
1998-2002 Daniel Veillard. All Rights Reserved
Is the demand controller
working normally?
Is the LAN cable connected to
the product?
opensource@lge.com
Check if the demand controller is
normal.
Check if the LAN cable is connected
correctly to the device.
Check if DI1 CH is open or short circuited.
(DI1 CH should be always open except
when a fire occurs.)
Check if the lock is on and if so, disable
the lock.
If devices are not correctly connected,
the error sign is displayed. Check the
connection status of the devices.
Hint
143
Hide quick links:
Advertisement
Table of Contents
