Step 1 Cut The Countertop Opening - GE Professional Rangetop Installation Instructions Manual

36" and 48" professional rangetops
Table of Contents

Advertisement

Available languages

Available languages

CUT THE COUNTERTOP OPENING
STEP 1
48" wide models are designed to fit in 48" or wider base cabinets
Measure carefully when cutting the countertop.
Make sure sides of the opening are parallel.
• Allow 8" free space below the top surface of the countertop.
• Allow additional clearances below the burner box
to install the regulator and make house supply
connections. Use a 90° elbow to route the gas
connections and limit interference with drawers
or other cabinetry features.
• These rangetops are designed to hang from
the countertop by their side flanges.
• Smooth any rough edges on the countertop before
installing the rangetop.
– Formica countertop edges must be finished.
The countertop must be strong enough to support
the weight of the rangetop.
Installation
36" wide models are designed to fit in 36" or wider base cabinets
Cutout Opening with False Bottom
36" Rangetop
48" Rangetop
• You can construct the cutout with a false bottom to
conceal the bottom of the rangetop.
– Build the false bottom using a solid material; cut a
7-1/2" x 11-1/8" hole in the left rear corner for the gas
inlet and power cord clearances.
9
Dimensions
A (Dia.)
B
C
D
7-3/8"
1-1/2"
7-1/2" 11-1/8"
8-1/4"
1-1/2"
7-1/2" 11-1/8"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents