Cooking With The Automatic Warm Up Function - AEG COMPETENCE E8871-4 Operating Instructions Manual

Built-in
Table of Contents

Advertisement

Cooking with the automatic warm up function

When cooking with the automatic warm up function, the cooking zone
works with full power for a certain amount of time and then switches
back to the heat setting set to continue cooking.
1. To switch on the automatic warm up period, turn the ring switch clock-
wise as far as it will go.
2. Then turn the ring switch back to the desired heat setting for the con-
tinuing cooking period.
3. To end the cooking process, turn back to the "O" position.
3
If you select a higher heat setting during the warming up time, e. g.
turning from "3" up to "6", the time that has already elapsed for the
warming up period is taken into consideration. If you select a lower
heat setting, the warm up period will end immediately.
3
You can end the automatic warm up function early by turning the ring
switch back to the Off position and then setting the required heat set-
ting for the continuing cooking period again.
Warming up times when cooking with the automatic
warm up function
Switch setting:
A and 9
A and 8
A and 7
.
A and 6
A and 6
.
A and 5
A and 5
.
A and 4
A and 4
.
A and 3
A and 3
.
A and 2
A and 2
A and 1
A and
3
When cooking with the appliance for the first few times, take careful
note of how it performs. This will help you decide which heat settings
are best for "your cookware" and "your recipes and quantities".
Warming up time with the automatic
warm up function
no automatic warm up function
4.5 minutes
3.5 minutes
3 minutes
2 minutes
12.5 minutes
10 minutes
8 minutes
6.5 minutes
5.5 minutes
5 minutes
3 minutes
2 minutes
1 minutes
0.5 minutes
15

Advertisement

Table of Contents
loading

Table of Contents