A = Auxiliary burner
SR= Semi-rapid burner
R = Rapid burner
TC= Triple Crown burner
These hobs can be inserted in a
built-in kitchen unit whose depth is
between 550 and 600 mm. The hobs
dimensions are shown in Fig. 4.
The edge of the cut out must have a
minimum distance from the rear wall of
If there are side walls, or sides of the
furniture unit near the hob, the cut out
edges must have a minimum distance of
Hanging forniture units or hoods
must be placed at 650 mm. minimum
from the hob.
Fitting the hob to the worktop
Carry out the building in of the hob
1. Place the seals supplied with the hob
on the front edge of the cut out.
Then, place them at 11 mm from the
side edges and at 10 mm from the
rear edge, as shown in the diagram,