Charging The Battery - Samsung GT-P5210 User Manual

Getting started

Charging the battery

Use the charger to charge the battery before using it for the first time. A computer can be also
used to charge the device by connecting them via the USB cable.
Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or
cables can cause the battery to explode or damage the device.
• W hen the battery power is low, the device emits a warning tone and displays a low
battery power message.
• I f the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to charge for
a few minutes before turning on the device.
Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of the USB cable into
the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
• T he device can be used while it is charging, but it may take longer to fully charge
the battery.
• I f the device receives an unstable power supply while charging, the touch screen
may not function. If this happens, unplug the charger from the device.
• W hile charging, the device may heat up. This is normal and should not affect the
device's lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
• I f the device is not charging properly, take the device and the charger to a
Samsung Service Centre.
10