Miele KM 405 Operating Instructions Manual page 21

All electrical work should be carried out
by a competent person, in strict accor-
dance with national and local safety
regulations.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
Connection for each appliance should
be made via a suitable isolator.
The data plate gives the necessary
data for connection.
Voltage: 230 - 240 V, 50 Hz
Rated load: see data plate
Plug rating: 10 A
Test marks Gas safety
Electrical safety,
C-Tick Mark.
Electrically suppressed
according to AS/NZS 1044
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings iden-
tifying the terminals in your plug pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or
coloured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter A or coloured
red.
21