Applying The Qos Policy - HP 4800G Series Configuration Manual

To do...
Create a behavior and enter
behavior view
Configure a traffic
redirecting action
Exit behavior view
Create a policy and enter
policy view
Associate the class with the
traffic behavior in the QoS
policy
To implement policy routing successfully, ensure that the next hop address specified in the redirect
action exist and the outgoing interface is not a tunnel interface. If you fail to do that, the matching traffic
will be dropped.

Applying the QoS Policy

When configuring policy routing, you can apply a QoS policy to different occasions:
Applied globally, the policy takes effect on the traffic sent or received on all ports.
Applied to an interface, the policy takes effect on the traffic sent or received on the interface.
Applied to a VLAN, the policy takes effect on the traffic sent or received on all ports in the VLAN.
A QoS policy used for policy routing applies to only traffic received on all ports/an interface/all ports in a
VLAN.
Follow these steps to apply the QoS policy globally:
To do...
Enter system view
Apply the QoS policy globally
Follow these steps to apply the QoS policy to an interface:
Use the command...
traffic behavior behavior-name
redirect next-hop { ipv4-add
[ ipv4-add ] | ipv6-add [ interface-type
interface-number ] [ ipv6-add
[ interface-type interface-number ] ] }
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
qos apply policy policy-name
global inbound
1-2
Remarks
Required
Optional
—
—
—
Remarks
—
Required