Is-Is Configuration; Is-Is Overview; Basic Concepts - HP 4800G Series Configuration Manual

24/48 port
Table of Contents

Advertisement

1

IS-IS Configuration

When configuring IS-IS, go to these sections for information you are interested in:

IS-IS Overview

IS-IS Configuration Task List
Configuring IS-IS Basic Functions
Configuring IS-IS Routing Information Control
Tuning and Optimizing IS-IS Networks
Configuring IS-IS Authentication
Configuring System ID to Host Name Mappings
Configuring IS-IS GR
Enabling the Logging of Neighbor State Changes
Enabling IS-IS SNMP Trap
Displaying and Maintaining IS-IS
IS-IS Configuration Example
The term "router" in this document refers to a router in a generic sense or an Ethernet switch running
routing protocols.
IS-IS Overview
Intermediate System-to-Intermediate System (IS-IS) is a dynamic routing protocol designed by the
International Organization for Standardization (ISO) to operate on the connectionless network protocol
(CLNP).
The IS-IS routing protocol was modified and extended in RFC 1195 by the International Engineer Task
Force (IETF) for application in both TCP/IP and OSI reference models, and the new one is called
Integrated IS-IS or Dual IS-IS.
IS-IS is an Interior Gateway Protocol (IGP) used within an Autonomous System. It adopts the Shortest
Path First (SPF) algorithm for route calculation.

Basic Concepts

IS-IS terminology
Intermediate system (IS). An IS, similar to a router in TCP/IP, is the basic unit in IS-IS to generate
and propagate routing information. In the following text, an IS refers to a router.
End system (ES). An ES refers to a host system in TCP/IP. ISO defines the ES-IS protocol for
communication between an ES and an IS, and therefore an ES does not participate in the IS-IS
processing.
1-1

Advertisement

Chapters

Table of Contents
loading

Table of Contents