Setting The Interval For Collecting Ethernet Interface Statistics - HP 4800G Series Configuration Manual

24/48 port
Table of Contents

Advertisement

The storm suppression ratio settings configured for an Ethernet interface may get invalid if you enable
the storm constrain for the interface. For information about the storm constrain function, see
Configuring the Storm Constrain Function on an Ethernet
Follow these steps to set storm suppression ratios for one or multiple Ethernet interfaces:
To do...
Enter system view
Enter
Ethernet
interface
view or port
group view
Set the broadcast storm
suppression ratio
Set the multicast storm
suppression ratio
Set the unknown unicast
storm suppression ratio
If you set storm suppression ratios in Ethernet interface view or port group view repeatedly for an
Ethernet interface that belongs to a port group, only the latest settings take effect.

Setting the Interval for Collecting Ethernet Interface Statistics

Follow these steps to configure the interval for collecting interface statistics:
To do...
Enter system view
Enter Ethernet port view
Use the command...
system-view
Enter
Ethernet
interface interface-type
interface
interface-number
view
Enter port
port-group manual
group view
port-group-name
broadcast-suppression
{ ratio | pps max-pps }
multicast-suppression
{ ratio | pps max-pps }
unicast-suppression
{ ratio | pps max-pps }
system-view
interface interface-type
interface-number
Interface.
Use either command.
If configured in Ethernet interface view,
this feature takes effect on the current
port only; if configured in port group
view, this feature takes effect on all
ports in the port group.
Optional
By default, all broadcast traffic is
allowed to pass through an interface,
that is, broadcast traffic is not
suppressed.
Optional
By default, all multicast traffic is
allowed to pass through an interface,
that is, multicast traffic is not
suppressed.
Optional
By default, all unknown unicast traffic
is allowed to pass through an interface,
that is, unknown unicast traffic is not
suppressed.
Use the command...
1-6
Remarks
Remarks

Advertisement

Chapters

Table of Contents
loading

Table of Contents