HP 4800G Series Configuration Manual page 1887

24/48 port
Table of Contents

Advertisement

[SwitchA] track 1 nqa entry admin test reaction 1
5)
Verify the configuration.
# On Switch A, display information about all the Track entries.
[SwitchA] display track all
Track ID: 1
Status: Positive
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
10.1.1.0/24
10.2.1.0/24
10.2.1.2/32
127.0.0.0/8
127.0.0.1/32
The above information shows that the static route with the next hop 10.2.1.1 is active, and the status of
the track entry is positive. The static route configuration works.
# Remove the IP address of VLAN-interface 3 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 3
[SwitchB-Vlan-interface3] undo ip address
# On Switch A, display information about all the Track entries.
[SwitchA] display track all
Track ID: 1
Status: Negative
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 4
Destination/Mask
10.2.1.0/24
10.2.1.2/32
Routes : 5
Proto
Pre
Cost
Static 60
0
Direct 0
0
Direct 0
0
Direct 0
0
Direct 0
0
Routes : 4
Proto
Pre
Cost
Direct 0
0
Direct 0
0
1-39
NextHop
Interface
10.2.1.1
Vlan3
10.2.1.2
Vlan3
127.0.0.1
InLoop0
127.0.0.1
InLoop0
127.0.0.1
InLoop0
NextHop
Interface
10.2.1.2
Vlan3
127.0.0.1
InLoop0

Advertisement

Chapters

Table of Contents
loading

Table of Contents