Outputting System Information To A Log Host - HP 4800G Series Configuration Manual

To do...
Configure the output rules of
the system information
Configure the format of the time
stamp
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do...
Enable the monitoring of
system information on a
monitor terminal
Enable the display of
debugging information on a
monitor terminal
Enable the display of log
information on a monitor
terminal
Enable the display of trap
information on a monitor
terminal

Outputting System Information to a Log Host

To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Use the command...
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
1-8
Remarks
Optional
Refer to Default output rules of
system information.
Optional
By default, the time stamp
format for log, trap and
debugging information is date.
Remarks
Required
Enabled on the console and
disabled on the monitor
terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for default
channel names.