Configuring Bfd For The Vrrp Master To Monitor The Uplinks - HP 4800G Series Configuration Manual

Track Object
Virtual IP
Virtual MAC
Master IP
# Display the track entry information of Switch B.
<SwitchB> display track 1
Track ID: 1
Status: Negative
Reference Object:
BFD Session:
Packet type: Echo
Interface : vlan-interface2
Remote IP : 192.168.0.101
Local IP : 192.168.0.102

Configuring BFD for the VRRP Master to Monitor the Uplinks

Network requirements
The master monitors the state of its uplink. When the uplink is down, the mater decreases its
priority and sends a VRRP packet with the new priority. Upon receiving the packet with a lower
priority, the backup becomes the new master after a very short delay.
The backup monitors the state of its uplink. Once the uplink state goes down, the backup lowers its
priority.
: 1
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.102
Switchover
1-30