Configuring Sp+Wrr Queues - HP 4800G Series Configuration Manual

To do...
group view
Enter port
group view
Enable WFQ queuing
Configure the minimum
guaranteed bandwidth for
an WFQ queue
Specify the queue
scheduling weight for an
WFQ queue
Configuration example
1) Network requirements
Enable WFQ on GigabitEthernet 1/0/1, and set the weights of queues 0 through 7 to 1, 2, 4, 6, 8, 10,
12, and 14 respectively.
Set the minimum guaranteed bandwidth of queue 0 to 128 kbps.
2) Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure WFQ queues on GigabitEthernet 1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos wfq 0 weight 1
[Sysname-GigabitEthernet1/0/1] qos wfq 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wfq 2 weight 4
[Sysname-GigabitEthernet1/0/1] qos wfq 3 weight 6
[Sysname-GigabitEthernet1/0/1] qos wfq 4 weight 8
[Sysname-GigabitEthernet1/0/1] qos wfq 5 weight 10
[Sysname-GigabitEthernet1/0/1] qos wfq 6 weight 12
[Sysname-GigabitEthernet1/0/1] qos wfq 7 weight 14
# Set the minimum guaranteed bandwidth of queue 0 to 128 kbps.
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 0 min 128

Configuring SP+WRR Queues

Configuration Procedure
Follow these steps to configure SP + WRR queues:
To do...
Enter system view
Use the command...
port-group manual
port-group-name
qos wfq
qos bandwidth queue queue-id
min bandwidth-value
qos wfq queue-id weight
schedule-value
Use the command...
system-view
5-7
Remarks
settings in port group view take
effect on all ports in the port
group.
Required
By default, all the ports adopt
the WRR queue scheduling
algorithm, with the weight
values assigned to queue 0
through queue 7 being 1, 2, 3,
4, 5, 9, 13, and 15.
Optional
64 kbps by default
Optional
1 by default
Remarks
—