To switch to 3D automatically, select Automatic.
To show a notification first, select Notify.
To never switch to 3D, select No 3D.
You can still change this preference in the Setup menu > TV
settings > 3D > Switch to 3D.
Start 3D
When the TV switches to 3D or when a notification is shown
that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
screen. To switch to 3D, press 3D and select Side by side or
Top / bottom according to the double image positions.
Stop 3D
To stop watching 3D, press oOPTIONS, select 3D depth
and select Off.
3D is switched to 2D when you switch to another channel or
connected device.
2D to 3D conversion
You can convert any 2D programme to watch it in 3D.
To convert a 2D programme to 3D, press 3D, select 2D to
3D conversion and confirm with OK.
To stop the 2D to 3D conversion, press 3D and select 2D
and press OK or switch to another activity in the Home menu.
The conversion will not stop if you switch between TV
channels.
You can change the depth of 3D for a weaker or stronger 3D
effect in the 2D to 3D conversion.
To change the 3D depth, press oOPTIONS and select 3D
depth. Select Off (no 3D), Less (less 3D depth), Normal
(optimal 3D quality) or More (more 3D depth).
5.4
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that
you:
• sit at least 3 times the height of the TV screen away from
the TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or certain
energy saving light bulbs which operate on a low frequency)
and direct sunlight as they may interfere with the 3D
experience.
Page 52
3D / Optimal 3D viewing