Explanation Of Code In Remarks Column - MULTIQUIP Power WHISPERWATT DCA150SSI Operation And Parts Manual

The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. multiquip
does not guarantee the availability of the parts listed.
Sample partS lISt
no. part no. part name
1 12345 BOLT .....................1 .....INcLUDES ITEmS W/%
2% WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY
2% 12347 WASHER, 3/8 IN. ..1 .....mQ-45T ONLY
3 12348 HOSE ..................A/R ...mAKE LOcALLY
4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE
no. Column
Unique Symbols — All items with same unique
symbol
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
"Remarks" column.
Duplicate item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
part no. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by multiquip. Other entries will
be clarifi ed in the "Remarks" column.
page 50 — DCa150SSI/DCa150SSIu 60 hz gen. • operatIon anD partS manual — rev. #0 (11/23/09)

ExPLANATION Of CODE IN rEMArkS COLUMN

QtY. remarKS
QtY. Column
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarifi ed in the "Remarks"
column.
remarKS Column
Some of the most common notes found in the "Remarks"
column are listed below. Other additional notes needed
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
Indicated by:
"INcLUDES ITEmS W/(unique symbol)"
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
"S/N XXXXX AND BELOW"
"S/N XXXX AND ABOVE"
"S/N XXXX TO S/N XXX"
Specific model number use — Indicates that the part
is used only with the specifi c model number or model
number variant listed. It can also be used to show a
part is NOT used on a specifi c model or model number
variant.
Indicated by:
"XXXXX ONLY"
"NOT USED ON XXXX"
"make/obtain locally" — Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables, shims,
and certain washers and nuts.
"not Sold Separately" — Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through multiquip.