Bridge Surface Unit - GE Digital Radiant Cooktop Owner's Manual

Ge monogram digital radiant cooktop owner's manual
Hide thumbs Also See for Digital Radiant Cooktop:
Table of Contents

Advertisement

Using the
bridge
Center
surface
rear
element
units
separately
To use each circular element separately:
1. Touch the ON/OFF pad.
2. Touch the INCREASE
NOTE: If you touch the INCREASE pad first the
surface unit will come on at the highest (H) heat
setting. If you touch the DECREASE pad first the
surface unit will come on at the lowest (L) heat setting.
There are eleven heat settings ranging from
Low (L) to High (H) to choose from.
3. To turn a surface unit off, touch the
Using the
bridge
Center
surface unit
rear
element
The controls can be used to create an oblong
heated area.
Because of its bigger dimensions, larger pans
can be used on the bridge surface unit.
Choose pans that match the bridge surface
unit area as closely as possible.
To use the bridge element:
1. Touch the ON/OFF pad.
2. Touch the bridge
3. Touch the INCREASE
10
pads to choose the
DECREASE
desired heat setting. The display shows
your heat setting.
ON/OFF pad again.
Bridge
pad.
pads to choose the
DECREASE
desired heat setting. The display shows
your heat setting.
Touch Controls
Right
rear
element
Touch these
pads to use
the center
rear element
and/or
separately.
NOTE: To use the right element separately use the
right rear controls and touch the
the center element separately use the center
rear controls.
Right
rear
element
These controls
cannot be used
when the bridge
surface unit is
being operated.
NOTE: If you touch the INCREASE pad first the
surface unit will come on at the highest (H) heat
setting. If you touch the DECREASE pad first the
surface unit will come on at the lowest (L) heat setting.
There are eleven heat settings ranging from
Low (L) to High (H) to choose from.
and/or
4. To turn a surface unit off, touch the
ON/OFF pad again.
Digital Radiant Cooktop
Touch these
Touch this pad
pads to increase
to use the right
or decrease the
rear element
heat setting.
separately.
pad. To use
Touch these
Touch this pad to
pads to increase
use both elements
or decrease the
combined with the
heat setting.
bridge element
between them.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents