Access Panel
Description
Access panel
1.
Prepare the computer for disassembly
2.
Loosen the captive Torx screw (1) on the back panel that secures the panel to the computer.
3.
Slide the side panel toward the back (2), and then pull it away from the computer.
NOTE:
To replace the access panel, reverse the removal steps.
50
Chapter 7 Removal and Replacement Procedures – Microtower Chassis
Lay the computer on its side to install internal parts.
(Preparation for Disassembly on page
Spare part number
674373-001
49).