Making Copies; Copy Options; Stop Copying; Improving Copy Speed And Quality - Brother MFC-J650DW Advanced User's Manual

7

Making copies

Copy options

You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after being idle for 1 minute.
Press Copy, and then press Options. Press
a or b to scroll through the copy settings.
When the setting you want is displayed, press
it and choose your preferred option.
When you have finished changing the
options, press OK and then press
Mono Start or Colour Start.
NOTE
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will
remain until you change them again. (See
Setting your changes as a new default
on page 49.)
• You can save some of the options you use
most often by setting them as a Shortcut.
(See Saving copy options as a Shortcut
on page 50.)
• The Ink Save Mode
Thin Paper Copy
Watermark Copy
supported by technology from Reallusion,
Inc.
1
MFC-J870DW only

Stop copying

To stop copying, press
38
1
,
1 1
, Book Copy and
1
features are
.
Improving copy speed and
7
quality
You can choose from the speed and quality.
The factory default is Normal.
NOTE
If you choose Fast or Normal, you can
only choose Plain Paper in
Paper Type.

Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.

Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images,
such as photographs. This provides the
highest resolution and slowest speed.
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press Options.
e
Press a or b to display Quality.
7
f
Press Quality.
g
Press Fast, Normal or Best.
h
Press OK.
i
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(Copy).
7
7