Making N In 1 Copies Or A Poster - Brother MFC-J220 Advanced User's Manual

Chapter 7
Making N in 1 copies or a
poster (Page Layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
IMPORTANT
• Make sure paper size is set to A4 or
Letter.
• You cannot use the Enlarge/Reduce
and Stack/Sort (MFC-J410 and
MFC-J415W only) settings with the N in 1
and Poster features.
• N in 1 colour copies are not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
Note
Sort (MFC-J410 and MFC-J415W only)
and Enlarge/Reduce are not available
with Page Layout.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Page Layout.
Press OK.
22
e
Press a or b to choose Off(1in1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
7
Poster(3x3).
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
If you are using the scanner glass, go
to step g.
g
After the machine scans the page,
press 1 to scan the next page.
h
Place the next page on the scanner
glass.
Press OK.
i
Repeat steps g and h for each page of
the layout.
j
After all the pages have been scanned,
press 2 to finish.
Note
If you have chosen photo paper as the
Paper Type for N in 1 copies, the machine
will print the images as if plain paper had
been chosen.