Failed Wired Connection - Samsung LED 7000 series E-Manual

Failed Wired Connection

No network cable found
Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is
on, try turning it off and on again.
IP auto setting failed
Perform the following or set the IP address manually from
11
Ensure that the DHCP server is enabled on the router and reset the router.
21
If this does not work, contact your Internet Service Provider for more information.
Unable to connect to the network
Check the following:
11
IP Settings.
Check the
21
Ensure that the DHCP server is enabled on the router and unplug and then plug the router back in.
31
If this does not work, contact your Internet Service Provider for more information.
Connected to a local network, but not to the Internet
11
Make sure that the Internet LAN cable is connected to the router's external LAN port.
21
Check the DNS settings under
31
If the problem persists, contact your Internet Service Provider.
Network setup complete, but unable to connect to the Internet
If the problem persists, contact your Internet Service Provider.
Try Now Try Now
Try Now
Try Now
IP Settings.
IP Settings.
Try Now
Try Now