To Immediately Record The Same Scenes Of Programme That You Are Viewing On The Tv (Direct Recording) - Panasonic NV-FJ600 Series Operating Instructions Manual
Hide thumbs
Also See for NV-FJ600 Series:
- Operating instructions manual (35 pages) ,
- Operating instructions manual (34 pages)
Table of Contents
Advertisement
Recording of Stereo or Bilingual
Programmes
(NV-FJ600A only)
1 Recording is automatically made in the stereo or
bilingual mode. This prevents errors in the selection of the
dubbed or the original language.
2 During playback press the AUDIO OUT button ? to select
the desired sound mode. See page 14.
The NICAM Broadcast System
(NV-FJ600EA only)
NV-FJ600EA is equipped with the NICAM sound system.
NICAM is a 2 channel sound broadcast system to provide
either a high quality stereo sound track or 2 independent
MONO sound tracks, M1 and M2.
NICAM programmes are always accompanied by standard
sound broadcasts and you can select the desired sound with
the AUDIO OUT button ? during playback.
≥ The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
≥ When NICAM programme is being received, the indicators
are lit to inform you of the type of broadcast. (See page 14.)
≥ To record the regular sound (ordinary normal sound) on
the FM audio tracks when a NICAM programme is
received, set “MONAURAL” to “ON”. (See page 17.)
≥ To hear stereo performance connect as shown on page 7
to a TV or Stereo Amplifier with left and right audio inputs.
Important Note for the NICAM System
When NV-FJ600EA is switched on, the tuner will
automatically switch to a NICAM broadcast, if NICAM is
being transmitted.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and M2 formats are not yet
available. Even if the sound track is MONO, the stereo
indicator will appear.
To Immediately Record the
Same Scenes of Programme
That You Are Viewing on the TV
(Direct Recording)
This function allows you to immediately start recording the
same scenes of programme that you are viewing on the TV.
Conditions for correct operation of the Direct Recording
function:
≥ Set “DIRECT REC” to “ON”. (See page 17.)
≥ The VCR must be connected to the TV’s Audio/Video
output sockets via Audio/Video cable as shown.
AV1 (AUDIO IN d / VIDEO IN b)
IN (AV1) OUT
IN
VIDEO
RF
L
AUDIO
R
OUT
Audio/Video Output Sockets of TV
To Perform Direct Recording:
1
Insert a video cassette with an intact erasure prevention
tab.
2
Press the DIRECT REC button 6.
≥ Recording the scenes of the programme that you are
viewing on the TV starts.
≥ In some cases, it may not be possible to change the
programme position on the TV during Direct
Recording.
When viewing or displaying the programme from
your TV:
≥ Do not press the AV button 3, Numeric buttons 2
or Channel button P during Direct Recording,
otherwise the recording may not be performed
correctly.
When viewing or displaying the programme from
your VCR:
≥ It is possible to select and view any other TV
programme from your TV while the Direct Recording
continues.
After pressing the DIRECT REC button 6 to start
recording, select on your TV the programme
position of the TV programme that you want to view.
3
Press the Stop button 9 to stop recording.
Page 21
Hide quick links:
Advertisement
Table of Contents
