Asus Z87-WS User Manual page 118

Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
Post Delay Time [3 sec]
This item appears only when you set the Full Screen Logo item to [Enabled]. This item
allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values
range from 0 to 10 seconds.
This feature will only work when set under normal boot.
Bootup NumLock State [On]
[On]
[Off]
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
Interrupt 19 Capture [Disabled]
Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]
Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
3-44
Automatically adjusts Boot Logo for Windows
Maximizes the boot logo size.
Disables the full screen boot logo display during POST.
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Disables the function.
The system waits for the <F1> key to be pressed when error occurs.
The third-party ROM messages will be displayed during the boot sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Allows you to go to EZ Mode of the BIOS after POST.
requirements.
®
Chapter 3: BIOS setup