Displaying And Maintaining Ipv6 - H3C S5100-SI Operation Manual

To do...
Enter system view
Enable the dynamic domain
name resolution function
Configure an IPv6 DNS server
Configure the domain suffix.
The dns resolve and dns domain commands are the same as those of IPv4 DNS. For details about
the commands, refer to DNS Operation in this manual.

Displaying and Maintaining IPv6

To do...
Display DNS domain name
suffix information
Display IPv6 dynamic domain
name cache information.
Display DNS server information
Display the FIB entries
Display the mapping between
host name and IPv6 address
Display the brief IPv6
information of an interface
Display neighbor information
Display the total number of
neighbor entries satisfying the
specified conditions
Use the command...
system-view
dns resolve
dns server ipv6 ipv6-address
[ interface-type
interface-number ]
dns domain domain-name
Use the command...
display dns domain
[ dynamic ]
display dns ipv6
dynamic-host
display dns server
[ dynamic ]
display ipv6 fib
display ipv6 host
display ipv6 interface
[ interface-type
interface-number | brief ]
display ipv6 neighbors
[ ipv6-address | all | dynamic |
interface interface-type
interface-number | static | vlan
vlan-id ] [ | { begin | exclude |
include } regular-expression ]
display ipv6 neighbors { all |
dynamic | static | interface
interface-type interface-number
| vlan vlan-id } count
1-15
Remarks
—
Required
Disabled by default.
Required
If the IPv6 address of the DNS
server is a link-local address,
the interface-type and
interface-number arguments
are required.
Required
By default, no domain name
suffix is configured, that is, the
domain name is resolved
according to the input
information.
Remarks
Available in any view