Vlan; Displaying Switch Configuration - H3C S5100-SI Operation Manual

The configuration file must use .cfg as its extension name and the startup configuration file must be
saved at the root directory of the switch.
If you select to skip the current configuration file to boot the device in the Boot ROM menu, it takes
effect only once. When you restart the device, the device is started with the previously specified
configuration file.

Displaying Switch Configuration

To do...
Display the initial configuration
file saved in the Flash of a switch
Display the configuration file used
for this and next startup
Display the current VLAN
configuration of the switch
Display the validated
configuration in current view
Display current configuration
Use the command...
display saved-configuration [ unit unit-id ]
[ by-linenum ]
display startup [ unit unit-id ]
display current-configuration vlan [ vlan-id ]
[ by-linenum ]
display this [ by-linenum ]
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin
| exclude | include } regular-expression ]
1-5
Remarks
Available in
any view.