H3C S5100-SI Operation Manual page 735

To do...
Configure the source
port
Configure the test type
Configure the number
of probes per test
Configure the
automatic test interval
Configure the probe
timeout time
Configure the
maximum number of
history records that
can be saved
Configure the type of
service
Start the test
Display test results
8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client:
To do...
Enter system view
Enable the HWPing
client function
Create a HWPing test
group and enter its
view
Configure the
destination address
Use the command...
source-port port-number
test-type { tcpprivate |
tcppublic }
count times
frequency interval
timeout time
history-records number
tos value
test-enable
display hwping results
[ admin-name
operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
destination-ip ip-address
1-12
Remarks
Optional
By default, no source port is specified.
Required
By default, the test type is ICMP.
Optional
By default, one probe is made per time.
Optional
By default, the automatic test interval is zero
seconds, indicating no automatic test will be
made.
Optional
By default, a probe times out in three seconds.
Optional
By default, the maximum number is 50.
Optional
By default, the service type is zero.
Required
Required
The display command can be executed in any
view.
Remarks
—
Required
By default, the HWPing client function is
disabled.
Required
By default, no test group is configured.
Required
This IP address and the one configured on
the HWPing server for listening service
must be the same.
By default, no destination address is
configured.