H3C S5100-SI Operation Manual page 729

To do...
Enable the HWPing
client function
Create a HWPing test
group and enter its view
Configure the source
interface
Configure the test type
Configure the number
of probes per test
Configure the
maximum number of
history records that can
be saved
Configure the probe
timeout time
Start the test
Display test results
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
To do...
Enter system view
Enable the HWPing
client function
Create a HWPing test
group and enter its view
Configure the
destination IP address
Configure the source IP
address
Configure the source
port
Use the command...
hwping-agent enable
hwping administrator-name
operation-tag
source-interface
interface-type
interface-number
test-type dhcp
count times
history-records number
timeout time
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
destination-ip ip-address
source-ip ip-address
source-port port-number
1-6
Remarks
Required
By default, the HWPing client function is
disabled.
Required
By default, no test group is configured.
Required
You can only configure a VLAN interface
as the source interface.
By default, no source interface is
configured.
Required
By default, the test type is ICMP.
Optional
By default, each test makes one probe.
Optional
By default, the maximum number is 50.
Optional
By default, a probe times out in three
seconds.
Required
Required
You can execute the command in any
view.
Remarks
—
Required
By default, the HWPing client function is
disabled.
Required
By default, no test group is configured.
Required
By default, no destination address is
configured.
Required
By default, no source IP address is
configured.
Optional
By default, no source port is configured.