Introduction To Loading Approaches; Local Boot Rom And Software Loading; Boot Rom And Host Software Loading - H3C S5100-SI Operation Manual

1

Boot ROM and Host Software Loading

Traditionally, switch software is loaded through a serial port. This approach is slow, time-consuming and
cannot be used for remote loading. To resolve these problems, the TFTP and FTP modules are
introduced into the switch. With these modules, you can load/download software/files conveniently to
the switch through an Ethernet port.
This chapter introduces how to load the Boot ROM and host software to a switch locally and remotely.
When configuring the Boot ROM and host software loading, go to these sections for information you are
interested in:

Introduction to Loading Approaches

Local Boot ROM and Software Loading

Remote Boot ROM and Software Loading
Introduction to Loading Approaches
You can load software locally by using:
XModem through Console port
TFTP through Ethernet port
FTP through Ethernet port
You can load software remotely by using:
FTP
TFTP
The Boot ROM software version should be compatible with the host software version when you load the
Boot ROM and host software.
Local Boot ROM and Software Loading
If your terminal is directly connected to the Console port of the switch, you can load the Boot ROM and
host software locally.
Before loading the software, make sure that your terminal is correctly connected to the switch.
1-1