H3C S5100-SI Operation Manual page 491

Operation
Configure a multicast MAC
address for the cluster
Set the interval for the
management device to send
multicast packets
Set the holdtime of member
switches
Set the interval to send
handshake packets
2) Establish a cluster in automatic mode
Table 2-10 Establish a cluster in automatic mode
Operation
Enter system view
Enter cluster view
Configure the IP address range
for the cluster
Start automatic cluster
establishment
After a cluster is established automatically, ACL 3998 and ACL 3999 will be generated
automatically.
After a cluster is established automatically, ACL 3998 and ACL 3999 can neither be modified nor
removed.
Configuring inside-outside interaction for a cluster
Table 2-11 Configure inside-outside interaction for a cluster
Operation
Enter system view
Enter cluster view
Command
cluster-mac H-H-H
cluster-mac syn-interval
time-interval
holdtime seconds
timer interval
Command
system-view
cluster
ip-pool
administrator-ip-address
{ ip-mask | ip-mask-length }
auto-build [ recover ]
Command
system-view
cluster
2-12
Description
Required
By default, the cluster multicast
MAC address is
0180-C200-000A.
Optional
By default, the interval to send
multicast packets is one
minutes.
Optional
By default, the holdtime is 60
seconds.
Optional
By default, the interval to send
handshake packets is 10
seconds.
Description
—
—
Required
Required
Follow prompts to establish a
cluster.
Description
—
Required