Configuring Priority Trust Mode - H3C S5100-SI Operation Manual

Configuring Priority Trust Mode

Configuring Priority Mapping
Setting the Priority of Protocol Packets
Configuring Priority Marking
Configuring Traffic Policing
Configuring Traffic Shaping
Configuring Line Rate
Configuring Traffic Redirecting
Configuring VLAN Mapping
Configuring Queue Scheduling
Configuring Traffic Accounting
Enabling the Burst Function
Configuring Traffic Mirroring
Configuring Priority Trust Mode
Refer to Priority Trust Mode
Configuration prerequisites
The priority trust mode to be used has been determined.
The port where priority trust mode is to be configured has been determined.
The port priority value has been determined.
Configuration procedures
1) Configuring a port to trust port priority
Follow these steps to configure a port to trust port priority:
To do...
Enter system view
Enter Ethernet port view
Configure to trust port
priority and configure the
port priority
2) Configuring a port to trust 802.1p precedence of traffic
Follow these steps to configure a port to trust 802.1p precedence:
Task
for details about available priority trust modes.
Use the command...
system-view
interface interface-type
interface-number
priority priority-level
1-19
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
—
—
Optional
By default, the switch
trusts port priority and
the priority of a port is 0.