Telnet Configuration With Authentication Mode Being Scheme; Configuration Procedure - H3C S5100-SI Operation Manual

Telnet Configuration with Authentication Mode Being Scheme

Configuration Procedure

Follow these steps to configure Telnet with the authentication mode being scheme:
To do...
Enter system view
Enter one or more VTY user
interface views
Configure to authenticate
users in the scheme mode
Quit to system view
Enter the
default ISP
domain view
Configure the
AAA scheme
to be applied
Configure
to the domain
the
authenticati
on scheme
Quit to
system view
Create a local user and enter
local user view
Set the authentication
password for the local user
Specify the service type for
VTY users
Note that:
If you configure to authenticate the users in the scheme mode, the command level available to the users
logging in to the switch depends on the user level defined in the AAA scheme.
When the AAA scheme is local, the user level depends on the service-type { ftp | lan-access |
{ ssh | telnet | terminal }* [ level level ] } command.
When the AAA scheme is RADIUS or HWTACACS, you need to specify the user level of a user on
the corresponding RADIUS or HWTACACS server.
Use the command...
system-view
user-interface vty
first-number [ last-number ]
authentication-mode
scheme [ command-
authorization ]
quit
domain domain-name
scheme { local | none |
radius-scheme
radius-scheme-name
[ local ] | hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
quit
local-user user-name
password { simple | cipher }
password
service-type telnet [ level
level ]
3-7
Remarks
—
—
Required
The specified AAA scheme
determines what authentication
mode is adopted, local, RADIUS or
HWTACACS.
Users are authenticated locally by
default.
—
Optional
By default, the local AAA scheme is
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply RADIUS or
HWTACACS scheme, you need to
perform the following configuration
as well:
Perform AAA&RADIUS
configuration on the switch.
(Refer to the AAA part for more.)
Configure the user name and
password accordingly on the
AAA server. (Refer to the user
manual of AAA server.)
No local user exists by default.
Required
Required