11. Install panel A.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a rear turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove cowling C for replacing
the left turn signal light bulb or
cowling D for replacing the right
turn
signal
light
page 6-6.)
3. Remove the socket (together with
the turn signal light bulb) by turning
it counterclockwise.
1. Turn signal light bulb socket
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
6-35
5. Insert a new bulb into the socket,
EAU34260
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the cowling removed.
bulb.
(See
1
2
3
4
5
6
7
8
9