Handlebar Switches - Yamaha NEO'S YN50FU Owner's Manual

Self-diagnosis device
This model is equipped with a self-
diagnosis device for the fuel electrical
circuit.
If a problem is detected in the fuel
electrical circuit, all LCD segments of
the fuel gauge and the fuel level war-
ning indicator will flash. If this occurs,
have a Yamaha dealer check the vehi-
cle.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1. Dimmer switch " / "
2. Turn signal switch " /
3. Horn switch " "
Right
1. Start switch " "
3-6
EAU12348
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
"
Horn switch "
Press this switch to sound the horn.
Start switch "
Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 5-1 for star-
ting instructions prior to starting the
engine.
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When
EAU12500
"
EAUM1132
"
3