Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
All electrical systems are supplied with
power, and the meter lighting comes
on, and the engine can be started. The
key cannot be removed.
All electrical systems are off. The key
can be removed.
I NSTRUMENT AND CONTROL FUNCTIONS
The steering is locked, and all electrical
systems are off. The key can be re-
To lock the steering
1. Turn the handlebars all the way to
2. Push the key in from the "OFF" po-
sition, and then turn it to "LOCK"
while still pushing it.
3. Remove the key.
To unlock the steering
Push the key in, and then turn it to
"OFF" while still pushing it.
Never turn the key to "OFF" or
"LOCK" while the motorcycle is
moving, otherwise the electrical
systems will be switched off, which
may result in loss of control or an
accident. Make sure that the motor-
cycle is stopped before turning the
key to "OFF" or "LOCK".