Instrument And Control Functions; Main Switch/Steering Lock - Yamaha VITY XC125E Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Main switch/steering lock

3
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
TIP
The main switch/steering lock is
equipped with a keyhole cover. (See
page 3-2.)
ON
All electrical circuits are supplied with
power; the meter lighting, taillight, and
auxiliary light come on, and the engine
can be started. The key cannot be re-
moved.
EAU45440
TIP
The headlight comes on automatically
when the engine is started and stays on
until the key is turned to "OFF" or the
sidestand is moved down.
OFF
All electrical systems are off. The key
can be removed.
WARNING
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
LOCK
The steering and the centerstand are
locked, and all electrical systems are
EAU45430
off. The key can be removed.
To lock the steering and the center-
stand
1
EAU10661
EWA10061
1. Push.
2. Turn.
1. Put the scooter on the center-
2. Turn the handlebars all the way to
3. Push the key in from the "OFF" po-
EAU49001
4. Remove the key.
TIP
When the steering is locked, the center-
stand is locked, and the scooter cannot
be taken off it.
3-1
2
stand.
the left.
sition, and then turn it to "LOCK"
while still pushing it.